Shindaiwa DGK15F, Owner'S And Operator'S Manual

Page: 40 / 52

37
5
(5) Draining Water from the Fuel Tank
Drain Water Every 200 hours
Set a container to catch spilled water.
Remove the fuel drain plug and packing.
After the water has been drained, tighten the fuel
drain plug with new packing.
< Note >
 Replace the packing of the fuel drain plug with new packing each time the water is drained.
 Packing part no.: 6C090-58961 (Kubota part no.)
 After tightening the fuel drain plug, be sure to always check that there is no fuel leakage.
(6) Coolant Replacement
Replace Every 2,000 hours or 2 years
Open the top plate.
Remove the radiator cap.
Remove the coolant drain plug and packing
After the water has been drained, tighten the water drain plug with new packing.
Remove the sub-tank and flush the coolant from
the sub-tank.
Re-attach the sub-tank to its original position and
fill with coolant until it reaches the full level.
Fill the radiator with coolant until it reaches the
filler neck.
Re-attach and tighten the radiator cap.
Close the top plate.
< Note >
 Replace the packing of the water drain plug with new packing each time the coolant is drained.
 Packing part no.: 6C090-58961 (Kubota part no.)
 After tightening the water drain plug, operate the engine for a start period and be sure to always
check that there is no coolant leakage.

Refer to section
“ 8-2. Checking Coolant ” for the type of coolant.
1
1
6
7
8
3
2
4
9
Coolant Drain Plug
Sub-tank
FULL
LOW
2
Fuel Drain Plug
Radiator Cap
Top Plate
Filler Neck
3