Shindaiwa DGK15F, Owner'S And Operator'S Manual

Page: 25 / 52

22

Power available for use by each output terminal and receptacle are as show below.
The use is possible up to the kVA as shown below. (Unit: kVA)
1-phase, 3-wire
output terminal
1-phase 120 V receptacle
1-phase 240/120 V
receptacle
Total
CON1 CON2 CON3 CON4 CON5
U-W 12
Total 2.4 Total 2.4 12
12
U-N 6 6
W-N 6 6
※
Maximum total allowable capacity is less than 12kVA.
< Note >
 If using a single-phase 120 V (between output terminals U-N and W-N), connect an equivalent
load between U-N and W-N.
 If using a single-phase three-wire output terminal simultaneously with a receptacle output, make
sure that currents passing through each phase are less than the rated current of this generator.
N
GROUND
U W
U-N / W-N / U-W
W-N
U-N
Load
CON1
Load
CON2
Load
CON3
Load
CON4
120V
（
U-N
）
CON5
120V
(W-N)
W
Y
240V
（
U-W
）
X