Shindaiwa DGA12DM, Owner'S And Operator'S Manual

Page: 14 / 52

10
⑤
HORN RESET button
Use this button deactivate the horn output without acknowledging the alarms.
⑥
FAULT RESET button
Use this button to acknowledge alarms and deactivate the horn output. Inactive alarm will
disappear immediately and status of active alarms
will be changed to “confirmed” so they will
disappear as soon as their reasons dismiss.
⑦
UP button
Use this button to move up or increase value.
⑧
PAGE button
Use this button to switch over display pages.
⑨
DOWN button
Use this button to move down or decrease value.
⑩
ENTER button
Use this button to finish editing a setpoint or moving right in the history page.
⑪
GCB button
No use.
⑫
GENERATOR status indicator
There are two states
– Gen-set OK (indicator is green) and Gen-set failure (indicator is red).
Green LED is on if the generator voltage is present and within limits. Red LED starts flashing
when gen-set failure occurs. After FAULT RESET button is pressed, goes to steady light (if
an alarm is still active) or is off (if no alarm is active).
⑬
GCB on
No use.
⑭
Load
No use.
⑮
Operation Display
< Note>

The displayed information is
structured into “pages” and “screens”. USE PAGE button to switch over the
pages.