Shindaiwa DG1000MI, Owner'S And Operator'S Manual

Page: 31 / 52

- 31 -
Replacing the battery
Two batteries are connected in series order. Whenever you replace battery or disconnect
cables, always proceed with the following steps, otherwise battery may short-circuit.
8.6.1 Replacing the battery installed on the left side
toward the control panel:
① ① ① ①
Remove the clamp and cable from negative (-) post
from the battery on the right side (always remove
negative side first)
②
② ②
②
Remove the clamp and cable from positive (+) post
from the battery on the right side
③
③ ③
③
Remove the clamp and cable from negative (-) post
from the battery on the left side (always remove
negative side first)
④ ④ ④ ④
Remove the hold-down clamp from the battery on the
left side
⑤ ⑤ ⑤ ⑤
Remove the clamp and cable from positive (+) post
from the battery on the left side
⑥ ⑥ ⑥ ⑥
Remove the left side battery from the seat
※ ※ ※ ※
Reinstall the new battery in the reverse order
(always install the cable to the positive (+) post of the new battery first).
8.6.2 Replacing the battery installed on the right side toward the control panel:
① ① ① ①
Remove the clamp and cable from
negative (-) post from the battery on the
right side (always remove negative side
first)
② ② ② ②
Remove the hold-down clamp from the
battery on the right side
③
③ ③
③
Remove the clamp and cable from positive
(+) post from the battery on the right side
④ ④ ④ ④
Remove the right side battery from the
seat
※
※ ※
※
Reinstall the new battery in the reverse order (always install the cable to the positive (+)
post of the new battery first.
<Caution>
●
Make sure that the removed cable does not come in contact with the battery post.