9
Assembly of the Safety Guard
Install the Safety Guard
Lower Clamp
Spacer
Safety Guard
Outer
Tube
Bolt
Bolt
Spacer
Upper
Clamp
Figure 6
1. Insert the safety guard between
the outer tube and the lower clamp.
See Figure 6.
2. Fit the two spacers and the upper
clamp over the outer tube and
loosely install the four bolts.
See Figure 6.
NOTE:
It may be necessary to loosen the nut
and bolt to adjust lower clamp.
Install the Sub Guard
1. Install the sub guard.
See Figure 6A.
CAUTION!
Make sure the clamp screw and
nut is securely tightened before
tightening the four bolts.
WARNING!
NEVER operate the T2510 and
C2510 without the Safety Guard
installed and tightly secured!
Safety Guard
Sub Guard
Hook
Hook Receiver
Figure 6A
CAUTION!
Make sure the sub guard is
completely hooked at the hook
receiver.
WARNING!
NEVER use this machine
without sub guard when using a
trimmer head.
NOTE:
Make sure the edge of Safety Guard
is aligned with the groove of the sub
guard.
