8
For safe use of your product
Handling the product
General precautions
Exhaust fumes are toxic
The exhaust fumes from the engine contain toxic gases. Do not operate the product indoors or in other
ill ventilated places.
The exhaust fumes could cause poisoning.
Turn off the engine when checking or maintaining the product
Observe the following precautions when checking and maintaining your product after use:
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled
You could burn yourself.
Remove the spark plug cap before performing checks and maintenance
An accident could occur if the product starts unexpectedly.
Checking the spark plug
Observe the following precautions when checking the spark plug.
If the electrodesor terminals are worn, or if there are cracks in the ceramics, replace
them with new parts.
The spark test (for checking whether the spark plug is sparking) must be carried out
by your dealer.
The spark test must not be carried out in proximity of the spark plug hole.
The spark test must not be performed in places where there are fuel spills or inflammable gases
You must not touch the metal parts of the spark plug
The spark plug could ignite a fire or give you an electric shock.
WARNING
WARNING
Operator's manual
Be careful to read the operator's manual properly before using your product in order to ensure correct
operation.
Failure to do so could lead to an accident or serious injury.
Do not use the product for anything other than its intended purpose
You must not use the product for any purpose other than those described in the operator's manual.
To do so could lead to an accident or serious injury.
Do not modify the product
You must not modify the product.
To do so could lead to an accident or serious injury. Any malfunction resulting from a modification to the product will not be
covered by the manufacturer's warranty.
Do not use the product unless it has been checked and maintained
You must not use the product unless it has been checked and maintained. Always ensure that the product is checked
and maintained on a regular basis.
Failure to do so could lead to an accident or serious injury.
Loaning or assigning your product
When loaning your product to another party, ensure that the person borrowing the product receives the operator's
manual along with it.
If you assign your product to another party, please enclose the operator's manual with the product when handing it
over.
Failure to do so could lead to an accident or serious injury.
Being prepared in case of an injury
In the unlikely event of an accident or injury, please ensure that you are pre-
pared.
First aid kit
Towels and wipes (to stop any bleeding)
Whistle or mobile phone (for calling outside help)
If you are unable to perform first aid or call for outside help, the injury could
worsen.
Summary of Contents for C243S
Page 2: ...2...
Page 77: ...39 X750 022210 X750280 4100 2013 1Remarques et dos de couverture NOTES...
Page 119: ...41 Konformit tserkl rung...
Page 159: ...3...