Shindaiwa 81650 Owner'S/Operator'S Manual Download Page 3

3

DH251003

Work Safely

Shindaiwa hedge trimmers operate at very 

high speeds and can do serious damage or 

injury if they are misused or abused. 

Never 

allow a person without training or instruction 

to operate your unit!

 WARNING!  

    

Use Good Judgment

Stay Alert

You must be physically and mentally fit to 

operate this unit safely. 

 

WARNING!

Never operate power  

equipment of any kind if you are tired 

or if you are under the influence of 

alcohol, drugs, medication or any other 

substance that could affect your ability 

or judgement.

 WARNING!

 

 Minimize the Risk of Fire!

NEVER 

smoke or light fires near the 

engine.

ALWAYS

 stop the engine and allow it 

to cool before refueling. Avoid overfill

-

ing and wipe off any fuel that may have 

spilled.

ALWAYS

 move the unit to a place well 

away from a fuel storage area or other 

readily flammable materials before 

starting the engine.

NEVER

 place flammable material close

 

to the engine muffler.

NEVER

 run the engine without the spark 

arrester screen in place.

DO NOT OPERATE THIS UNIT

IF YOU ARE TIRED, ILL OR

UNDER THE INFLUENCE OF

ALCOHOL, DRUGS, OR

MEDICATION.

 WARNING!

Never make unauthorized attachment 

installations. 

Avoid

 using or storing this 

unit in a wet environment.  

Water on the cutters may  

enter the gearcase and  

damage your unit. 

Always 

wear eye, ear, 

and hand protection while 

operating this unit!

Always 

wear close-fitting clothing. Gloves offer 

added protection and are strongly recommended. 

Do not wear clothing or jewelry that could get 

caught in machinery.

Always 

keep proper footing and do not 

overreach. Maintain your balance at all 

times during operation.

Use extreme caution

 when  

operating near fences or  

electric wiring.

Never 

cut metal objects or 

wire with the blade.

Never 

operate this unit if 

the safety guard has been 

removed or damaged!

Never 

allow children to use 

the unit. Avoid operating near 

bystanders.

Always 

stop the engine 

and install the blade cover 

before moving to another 

work site, and maintain a 

firm footing while operating 

or carrying the trimmer.

Always 

stop the  

engine

 

before 

removing branches 

or debris from the 

cutters! Never allow 

the cutters to contact 

buildings or other  

hard objects!

Avoid

 cutting large or extremely 

“woody” branches. Doing so can 

shorten cutter life, and may also 

damage the gearcase.

WORK SAFELY!

Figure 1

ALWAYS

 wear eye protection to shield 

against thrown objects.

ALWAYS

 protect yourself from haz-

ards such as thorny brush and flying 

debris by wearing gloves and close 

fitting clothing that covers arms and 

legs. Never wear shorts. Don’t wear 

loose clothing or items such as jewelry 

that could get caught in machinery or 

underbrush. Secure long hair so it is 

above shoulder level.

NEVER

 run the engine when transport-

ing the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 

Fumes from engine exhaust can cause 

serious injury or death.

ALWAYS

 clear your work area of trash 

or hidden debris that could be thrown 

back at you or toward a bystander.

ALWAYS

 use the proper cutting tool 

for the job.

ALWAYS

 stop the unit immediately if it 

suddenly begins to vibrate or shake.  

Inspect for broken, missing or improp-

erly installed parts or attachments.

ALWAYS

 hold the unit firmly with 

 

both hands when cutting or trimming, 

and maintain control at all times.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark  

plug wire before performing any  

maintenance work.

Always 

operate with 

both hands firmly 

gripping the unit.

 WARNING!

 

 

Inspect front and rear handles for damaged or loose attachments before use. 

NEVER

 operate a hedge trimmer with damaged or loose handles.

General Safety Instructions

Summary of Contents for 81650

















































Reviews: