background image

16

Declaration of Conformity

DECLARATION

OF

CONFORMITY

   We hereby declare the Shindaiwa Articulated hedge Trimmer,
   Model SBA-AH2422 (SBA-AH2422/EU with 230PH/EC1, SBA-AH2422/EU with 230PHS/EC1).

   meets the following respective requirements.

   Council Directives: 

 

 

 

Standard taken:

   89/336/EEC as amended 

 

 

  EN 292 parts 1&2

   98/37/EC as amended   

 

 

  ISO 11680-1

   2000/14/EC as amended 

 

 

  CISPR 12

   2004/26/EC as amended

   Measured sound power level: 106dB(A)

   Guaranteed sound power level: 108dB(A)

   Technical documentation is kept by:
   K. Maeda  DIV. Manager
   Engineering Research and Development DIV.

                           

Shindaiwa Kogyo Co., Ltd.

Head office : 6-2-11, Ozuka—Nishi, Asaminami—Ku,

 

 

 

 

 

 

Hiroshima, 731—3167, Japan

TEL: 81-82-849-2003 , FAX: 81-82-849-2482 

   14th April, 2005

 

 

 

 

 

 

Shindaiwa Kogyo Co., Ltd.

   T. Yoshitomi
   DIV. Manager    

 

 

Head office : 6-2-11, Ozuka—Nishi, Asaminami—Ku,

   Quality Assurance DIV. 

 

 

 

 

Hiroshima, 731—3167, Japan

 

 

 

 

 

 

 

TEL: 81-82-849-2206 , FAX: 81-82-849-2481

Summary of Contents for 230PH





















Reviews: