background image

3

Safety Precautions

A Multipurpose Engine has the potential to 

do serious damage if misused, abused or 

mishandled. To reduce the risk of injury, 

you must maintain control at all times, and 

observe all safety precautions during op-

eration. 

Never permit a person without 

training or instruction to operate this 

unit!

Warning Labels

Warning labels affixed to the 

machine are as follows:

Read and follow this manual, 

make sure anyone using this 

unit does likewise. Failure to 

do so could result in serious 

personal injury or machine failure. Keep 

this manual for future reference.

Wear nonslip heavy-duty work 

gloves to improve your grip on 

this unit. Wear sturdy footwear 

with nonslip soles to provide 

good footing. Steel-toe safety 

boots are recommended. Wear 

snug-fitting clothes that also 

permit freedom of movement.

Never operate this tool or 

any other power equipment if 

you are tired, ill, or under the 

influence of alcohol, drugs, or 

any substance that could affect your ability 

or judgement.

Sound Power Level  

(measured in accordance  

with 2000/14/EC).

IMPORTANT! 

The operational procedures described 

in this manual are intended to help you 

get the most from this unit and also to 

protect you and others from harm. These 

procedures are general guidelines only, 

and are not intended to replace any 

safety rules/laws that may be in force in 

your area.                         

If you have any questions regarding your 

230PH/230PHs Multipurpose Engine, 

or if you do not understand something 

in this manual, your Shindaiwa Dealer 

will be glad to assist you. For additional 

information, you may also contact 

Shindaiwa Inc. at the address printed on 

the back of this manual.

WARNING!

Do not make unauthorized 

modifications to this machine.

Summary of Contents for 230PH





















Reviews: