- 5 -
Leg Installation
①
Place the wheel vertically on
the carpet as displayed in the
picture to the right.
②
Remove the rubber caps.
(keep those for future use.)
Caution:
Wheel is not stable
standing vertically.
position of bolts
③
Insert the leg as the drawing illustrates.
Adjust the height evenly on all three legs.
Tighten bolts with allen wrench.
3 different height adjustments .
Height 555mm
④
Place the wheel horizontally after tighting the bolts.
Bolts
M6 x 12
Height 525mm
Height 275mm
allen wrench
Power connection
Connect the power cable to a 230V
single phase AC power outlet only.
May cause fire by
exceeding outlet
capacity.
Do not connect many power
cables to the same outlet.
Make sure the power switch is
off when you plug the power
cable into the AC outlet.
Power connection
①
Insert splash pan A into the groove .
②
Insert splash pan B into the groove.
③
Join splash pan A into splash B
Splash pan Ａ
Splash pan B
Wheelhead
Splash Pan Installation
Splash pan Ａ
Splash pan Ｂ
