Shimano ALFINE Inter-11, Dealer'S Manual

Page: 34 / 49

34
ADJUSTMENT
Adjusting the cassette joint
For internal 11-speed
1
(A)
(B)
Set the shift lever from 11 to 6 .
Check to be sure that the yellow setting
lines on the cassette joint bracket and
pulley are aligned at this time.
If the yellow setting lines are not
aligned, turn the cable adjustment barrel
of the shift lever to align the yellow
setting lines.
After this, move the shift lever once
more from 6 to 11 and then back to 6 ,
and then re-check to be sure that the
yellow setting lines are aligned.
(A)
Yellow setting lines
(B)
Cable adjustment barrel
TECH TIPS
•
The yellow setting lines on the cassette
joint are located in two places. Use the one
that is easiest to see.
< When bicycle is standing up >
Cassette joint pulley
Cassette joint bracket
Should be straight
< When bicycle is upside down >
Cassette joint pulley
Cassette joint bracket
Should be straight
2
(A)
(z)
After adjusting the cassette joint, cut off
the excess length of inner cable.
Then install the inner end cap.
After installing the inner end cap,
slightly bend the inner cable outward
(towards the dropout) so that it does not
touch the chain.
(z)
25 - 30 mm
(A)
Inner end cap