Shimano ALFINE Inter-11, Dealer'S Manual

Page: 12 / 49

12
INSTALLATION
Installation of the sprocket to the hub
INSTALLATION
„
Installation of the sprocket to the hub
Place the right-hand dust cap B/right-hand dust cap C onto the driver on the right side of
the hub body.
Next, install the sprocket and secure it in place with the snap ring.
(A)
Snap ring
(B)
Sprocket
(C)
Driver
(D)
Right-hand dust cap C
(E)
Right-hand dust cap B
(F)
Right-hand dust cap A
NOTICE
Note the orientation of the right-hand dust
cap.
Specification A
If the sprocket is an inward assembling
sprocket with 19T or fewer or for belt drive
specifications, right-hand dust cap A will come
into contact with the chain or pulley so
specification B should be used instead.
Specification B
If the sprocket is an inward assembling
sprocket with 16T and 3 mm teeth or for belt
drive specifications, remove right-hand dust
cap B before use.
Specifications
Applicable sprockets
Outward assembling Inward assembling
A 16T-23T 20T-23T
B
16T-23T
(A)
(B)
(C)
(F)
Specification A Specification B
Specification A Specification B
(D) (E)
Outward assembling Inward assembling