vi
Caution
●
Do not press hard on the control PC monitor
The control PC monitor is made of glass. Pressing hard on the monitor may result in
damage.
●
Apply no impact or unnecessary force to the product
This is a high-precision optical product. Do not apply impact by dropping the product or
apply unnecessary force to the lens mounting area. This may result in damage.
●
Do not touch the lens or camera head entrance window
Do not directly touch the lens or camera head entrance window with your hands. This may
cause scratching and contamination.
●
Set up the power unit so that the power switch can be easily reached.
If the power switch is positioned so that it is difficult to reach, if an emergency occurs,
shutting off the power supply cannot be performed quickly.
Inspection and Maintenance
Warning
●
Before performing servicing, pull out the plug
Before performing servicing, such as wiping off dirt, pull out the power plug from the
power outlet to ensure safety.
Failure to do so may result in electric shock.
●
Never open the camera head, power unit or control PC
Do not remove the camera head covers.
Doing so may result in electric shock.
●
Do not disassemble or modify
Do not disassemble or modify the product. Doing so may result in fire or electric shock.
Contact your Shimadzu representative for inspection, servicing or repair of the product
inside.
Caution
●
Do not use volatile solvents (paint thinner, benzene, etc.) or a damp cloth
to clean the product.
Do not use volatile solvents or a damp cloth to clean the product. Doing so may result in
rusting or discoloration.
Use a soft, dry cloth to wipe dirt off the product.
