13
High-Speed Video Camera
HPV-X2
Pr
epa
ra
tio
n
s fo
r Op
er
ati
on
4.
Preparations for Operation
4.1
Connecting Cables
Warning
●
To avoid electric shock, be sure to insert cables in a socket that
is equipped with a grounded terminal.
Failure to do so may result in electric shock.
●
To avoid electric shock if a 3-to-2 prong plug adapter is used, be
sure to connect the adapter ground wire to ground.
Failure to do so may result in electric shock.
Before connecting or disconnecting cables, be sure to switch the power OFF.
Failure to do may cause instrument damage.
If the LAN cable between the camera head and control computer is routed via a HUB connection,
be sure to use Gigabit Ethernet cable (1000 BASE-T) compatible products to avoid any slowdown
in functionality due to slower transmission.
Connect the cables as shown in Fig. 4-1.
Fig. 4-1 Cable Layout Diagram
✐
Note
✐
Note
Camera head (rear)
Power supply unit (rear)
Control
computer
LAN cable
Connect to a
power supply
outlet
Connect the AC
cable connector.
Power cable
Connect the LAN
cable connector.
Connect the LAN
cable connector.
Connect the LAN
cable connector.
Connect the connector on the
power cable.
