9
High-Speed Video Camera
HPV-X2
Nam
es
a
nd
Fun
cti
ons
o
f Co
m
po
ne
nts
No.
Part Name
Description
(5)
Trigger input connector
(BNC)
Connector used to input the trigger signal
The trigger input can be a TTL 5 V signal or normally open
contact input. (MAKE ON)
(6)
Camera status indicator
LEDs
These indicate the camera status.
The four indicators, [POWER], [STAT], [TRIG], and [SYNC],
indicate the following.
POWER
Illuminates green when the camera power is switched ON.
STAT
Illuminates red when an error occurs.
TRIG
Flashes green when the camera is ready for trigger input and
illuminates green during recording.
It remains OFF when not waiting for a trigger input or
recording.
SYNC
Illuminates green when a synchronization cable is connected.
(7)
LAN cable connector
Ethernet connector used to connect the LAN cable
(8)
Synchronization cable
connector
Connector used to connect the synchronization cable
(9)
F lens mount
Mount used to attach lenses
This is an F mount.
(10)
Handle
Hold the handle for carrying the camera head.
Always hold the handle when carrying the camera head.
Failure to do so may result in damage.
(11)
Camera head tripod
mount
A tripod can be attached to the camera head using the UNC3/8
screw in this mount.
Three screw holes are provided. Select the appropriate hole to
achieve a good weight balance of the camera head with the lens
attached.
Do not forcibly put screws other than UNC3/8 screw into the
camera tripod screw holes.
Doing so may damage the screw threads.
TC74VHCT14A
100
3.3k
+5V
TC74VHCT14A
100
3.3k
+5V
✐
Note
✐
Note
