17
4. Functions and Operation
4.7 Comparator Mode (checkweighing)
When COMP lamp
is on and mass value from the balance is printed, checkweighing result
“LOW”, “OK” or “HIGH” will be attached to each mass value. Checkweighing is performed according to
the two preset thresholds as below.
HIGH
(over)
HIGH
threshold
OK
(pass)
LOW
threshold
LOW
(under)
4.7.1 Setting comparator thresholds
[setting procedure]
Verify function lamp
is off. If not, press FUNC key
to turn it off.
Verify COMP lamp
is off. If not, press COMP key
to turn it off.
Set HIGH threshold and LOW threshold in this order as the following.
Note
After HIGH threshold has been set, it is stand-by for the LOW threshold setting.
At this time, key operations except for
,
, and
are invalid.
(example)
(1) Press Reset key
.
(2) Key in HIGH threshold.
１
０
０
・
５
(3) Press COMP key
. Print-out
HIGH=
___
100.5
(4) Key in LOW threshold.
９
９
・
５
(5) Press COMP key
. Print-out
LOW
_
=
____
99.5
Note
A comparator threshold must be a positive value of not more than 10 digits.
