11
4. Functions and Operation
(*6) Command code is output only when Function lamp is ON.
(*7) Equivalent to pressing the PRINT key of the balance
(*8) Equivalent to pressing the TARE or O/T key of the balance
Combined use of functions of EP-90 printer
X indicates available combination for simultaneous use.
ID number
X
Sample number
X X
xK Mode
X X X
Comparator
X X X
Auto Print
X X X X X
Statistic calculation
X
Date output
ID number
Sample
number
xK Mode
Comparator Auto Print
Combined use of functions of EP-90 printer and functions of the balance
Date output, ID number, Sample number, xK Mode of EP-90 printer can be simultaneously used with
any function of the balance that involves data output. At every mass data output, these EP-90’s
functions operate the same way as when mass data is output by pressing the print key.
(e.g.) While formulation mode of the balance is used, if ID number and Sample number
functions are ON, lines of ID/Sample numbers are inserted before each component
mass value. Turn off EP-90’s functions if they are not desired for each component.
4.2 Basic
Operation
While weighed result is displayed on the balance, if PRINT key of EP-90 or PRINT key of the balance
is pressed, the displayed value will be printed out with an indication of the weighing unit.
Depending on the balance series, additional data apart from weighed results such as calibration report,
application measurement results, date and time may also be output to EP-90 for printing. The PRINT
key of the balance or the balance's function menu should be used to output such items. Refer to the
balance's operation manual for instructions.
