Shimadzu BL2200H, Instruction Manual

Page: 22 / 38

-14-
8. REGISTRATION, CANCEL, AND CHANGE OF UNIT
Step for
registration (1) Press the CAL/MENU key and select the display.
(Press the TARE key.)
(2) Press the CAL/MENU key and select the display.
(Press the TARE key.)
(3) The registrable unit is displayed by every pressing the CAL/MENU
key. The registerable units are three kinds which are selected from the
following 14 kinds.
g, kg, ct. pcs, %, oz, ozt, dwt, GN, Hong-kong tail, Singapore tail,
Taiwan tail, Maraysia tail, and Japanese "monme"
However, % and pcs (No. of pieces) cannot be registered simultaneously.
The stability mark is lit on the unit display currently registered.
(4)
Press the TARE key on the unit display to be registered. That unit
is registered.
When three kinds of unit are already registered, a new registration deletes
the oldest registration among the three registered units. However, % and
pcs (No. of pieces) cannot be registered simultaneously. Then deletes
unnecessary one.
(5)
Continuously pressing the POWER/BRK key returns the display
to weight display.
Carry out the same operation described (1) to (3) above to set unit
display. Selecting the same one of the unit display which is currently
registered (stability mark is lit) cancels the registration.
Pressing the UNIT key changes the unit which is already
registered.
However, even if the unit of % and pcs is already registered, the
display does not change to this unit unless making a setting of
reference value.
Step for cancel (1)
Step for change (1)