Sherwood RD-8108, User Manual

Page: 6 / 41

7
ENGLISHENGLISH
OPT 1 OPT 2 COAX
1
COAX
2
DIGITAL
OUT IN
OPTICAL
Component with
COAXIAL DIGITAL OUT
Component with
COAXIAL DIGITAL OUT
Component with
OPTICAL DIGITAL OUT
Component with
OPTICAL DIGITAL OUT
Component as an MD recorder,
CD recorder with OPTICAL DIGITAL IN
FRONT
SPEAKERS
(6 )
SURROUND
SPEAKERS
(6 )
CENTER
SPEAKER
(6 )
SURROUND
BACK
(6 )
Front
left
Surround
left
Front
right
Surround
right
(Front)
Center
Surround
back
6. CONNECTING DIGITAL INs and
O U T
• The COAXIAL or the OPTICAL DIGITAL OUTs of the
components that are connected to CD and VIDEO 1~3 of this
unit can be connected to these DIGITAL INs.
• If a digital recorder or other component with OPTICAL DIGITAL
IN/OUT jacks is connected to the corresponding jacks of this
unit, you can playback and/or record the high quality sound of
CD’s, etc. without analog conversion or degradation.
• A digital input should be connected to the components such as
a CD player, LD player, DVD player, etc. capable of outputting
DTS Digital Surround, Dolby Digital or PCM format digital
signals, etc.
• For details, refer to the operating instructions of the component
connected.
• When making the COAXIAL DIGITAL connection, be sure to
use a 75 Ω COAXIAL cord, not a conventional AUDIO cord.
• All of the commercially available optical fiber cords cannot be
used for the equipment. If there is an optical fiber cord which
cannot be connected to your equipment, consult your dealer or
nearest service organization.
7. CONNECTING SPEAKERS
• Be sure to connect speakers firmly and correctly according
to the channel(left and right) and the po and -). If
the connections are faulty, no sound will be heard from the
speakers, and if the polarity of the speaker connection is
incorrect, the sound will be unnatural and lack bass.
• For installing the speakers, refer to “Speaker placement”
on page 20.
• After installing the speakers, first adjust the speaker
settings according to your environment and speaker
layout.(For details, refer to “Adjusting the speaker settings”
on page 21.)
Caution :
• Be sure to use the speakers with the impedance of 6
ohms or above.
• Do not let the bare speaker wires touch each other or any
metal part of this unit. This could damage this unit and/or
the speakers.
8. SWITCHED AC OUTLET
• This outlet is switched on(power-on mode) and
off(standby mode) according to power control as
follows(Maximum total capacity is 100 W):
Standby mode - switched AC outlet off
Power-on mode - switched AC outlet on
9. AC INPUT CORD
SWITCHED
120V~60Hz
100W 1A MAX
AC OUTLET
AC INPUT
120V~60Hz
2.5A