background image

Depending or relationship between speakers, settings
possible for each speaker are as follows:

Front L/R

Center

Surr. L/R Surr. Back Subwoofer

Large

Large

Small

Large

None

Small

Small

None

None

None

Large

Large

Small

Yes

Large

Small

None

or

Small

Small

No

None

None

None

Large

Large

Small

None

None

Small

Small

None

Small

Small

Small

None

Small

None

None

Yes

None

Small

Small

None

2 1

ENGLISH

• After you have installed this unit and connected all the components, you should adjust the speaker settings for the optimum

sound acoustics according to your environment and speaker layout.

• There are two kinds of speaker settings for speaker size and speaker distance. 

Speaker size settings

Select the corresponding settings depending on the sizes of the connected speakers and whether the speakers are connected
or not.

Adjusting the speaker settings

Depending on your speaker type, you can select one of
these following settings.

Large : Select this when connecting speakers that can

fully reproduce sounds below 80 Hz.

Small : Select this when connecting speakers that cannot

fully reproduce sounds below 80 Hz.
When this is selected, sounds below 80 Hz are
sent to the subwoofer or the front speakers
depending on wether the subwoofer setting is Yes
or No.

None : Select this when no speakers are connected.

When this is selected, sounds are sent to the front
speakers.

Yes / No : Select the desired depending on whether a

subwoofer is connected or not.

Speaker distance settings

When enjoying 5.1 channel surround playback with Dolby Digital and DTS sources, it is ideal that the center and surround
speakers should be the same distance from the main listening position as the front speakers. By entering the distance
differences between front and center speakers(Cd) and front and surround speakers(Sd), the delay times of center and
surround speakers are automatically adjusted to create an ideal listening environment virtually as if the center and surround
speakers were at their ideal locations respectively as below:

FL

SL

SB

SR

Df

Cd

Dc

Ds

Sd

SW

FR

Ideal location of a 
center speaker

All speakers should be located 
within a circle with a radius of Df

Ideal location of a 
surround speaker

Cd = Df - Dc
Sd = Df - Ds

Cd : Center distance difference
Sd : Surround distance difference
Df  : Front speaker distance
Dc : Center speaker distance
Ds : Surround speaker distance

C

Summary of Contents for RD-8108










































Reviews: