Sherwood R-977, Operating Instructions Manual, Page: 35 / 84

Operations
35
Listening to Radio Broadcasts
Selecting the band
1
Press the BAND button on the front panel or
TUNER button on the remote control to select the
desired band.
• Each time the button is pressed, the band
changes as follows:
(“ST“ light up)
(“ST“ goes off)
FM STEREO  FM MONO  AM
GAME AUX CD PHONO
TUNER BD/BDR STB/CBL
F AUX FRBT TV
REPEAT SHUFFLE FAVORITE DELETE
SURROUND
DISPLAY DIMMER
PURE
AUDIO
MONITOR
SELECT AUDIO SUBTITLE
STEREO
5 6 7 8
9 0
1 2 3 4
DVD/DVR
10
NET/USB
Note
• When FM stereo broadcasts are poor, due to a weak
broadcast signal, select the FM mono mode to reduce
the noise. The FM broadcasts are reproduced in
monaural sound.
Auto tuning
1
Press the BAND button on the front panel or
TUNER button on the remote control to select the
desired band.
2
Press the TUNING UP(+)/DOWN(−) buttons for
more than 0.5 second.
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and “TUNED”.
• If the station found is not the desired one,
simply repeat this operation.
• Weak stations are skipped during auto tuning.
R M TE ELE T
TUNE TUNE
MUTE
T/V
PRESET PRESET
M2 M3 M1
CH
CH
VOLUME CH.LEVEL
TEST SETUP
INPUT
VOLUME ROOM2
Manual tuning
1
Select the desired band by pressing the BAND
button on the front panel or the TUNER button on
the remote control.
2
Press the TUNING UP(+)/DOWN(−) buttons
repeatedly until the desired frequency has been
reached.
TUNE TUNE
MUTE
T/V
PRESET PRESET
M2 M3 M1
CH
CH
VOLUME CH.LEVEL
TEST SETUP
INPUT
VOLUME ROOM2