System Connections
22
•
Be sure to connect speakers firmly and correctly according to the channel (left and right) and the polarity (+ and
−). If the connections are incorrect, no sound will be heard from the speakers, and if the polarity of the speaker
connection is incorrect, the sound will be unnatural and lack bass.
•
When using only one surround back speaker, you should connect it to SURROUND BACK LEFT channel.
•
When listening in Dolby Pro Logic IIz mode, connect the front height speakers.
•
For installing the speakers, see “Speaker placement” on page 23.
•
For ROOM 2 playback, connect the ROOM 2 speakers. For details, see “Connecting ROOM 2 & ROOM 3
OUTs” on page 24.
•
After installing the speakers, first adjust the speaker settings according to your environment and speaker
layout. For details, see “Setting the Speaker/Room EQ Setup” on page 57.
•
Depending on how to use the speakers, you should assign the power amplifier correctly. For details, see “AMP
Assign” of “Setting the System Setup” on page 56.
Caution
• Be sure to use the speakers with the impedance of 6 ohms or above.
• Do not let the bare speaker wires touch each other or any metal part of this receiver. This could damage this receiver and/
or the speakers.
• Never touch the speaker terminals while the AC input cord is connected to the wall AC outlet. Doing so could result in
electric shocks.
Connecting speaker wire
1
Strip away approx. 10
mm (3/8 inch) of wire
insulation, and then
tightly twist the wire
ends.
2
Loosen the speaker
terminal by turning it
counter-clockwise.
3
Insert the bare part of
the wire.
4
Tighten the speaker
terminal by turning it
clockwise.
Summary of Contents for R-977
Page 1: ......