SHERCO CityCorp Enduro Supermotard 4T 125CC, Owner'S Manual

Page: 43 / 112

43
fig.4 TIME Adjustment
It is possible to adjust first the hours and then the minutes, depen-
ding on the digit selected (which will be shown flashing with f=1Hz,
Duty=50%); briefly pressing the button will increase the parameter
selected by one, while longer pressure will enable another parameter
to be selected (minutes rather than hours). Once the adjustment has
been effected, normal operation is resumed by holding the button
depressed for about 3 seconds. The Time parameter will be visuali-
sed in a 24h format if the unit of measurement selected is k.p.h., and
in the 12h format if the unit of measurement selected is m.p.h.
Note 1 Once into the adjustment menu, the system will return to
normal operation mode if 20 seconds pass without the button being
pressed.
Note 2 Once into the adjustment menu, if the bike starts to move
(speed>0), the system will automatically return to normal operation
mode.
Sequence displayed: from 0:00 to 23:59 in 0-24h format
from 0:00 to 12:59 in 0-12h a.m. format
from 1:00 to 11:59 in 0-12h p.m. format
Precision of the clock: ±2.5”/day. The information is not saved to
memory.