Page 4
Inputs and Outputs
Analog inputs:
Each channel has
independent, switch selectable balanced (XLR) and unbalanced (RCA) inputs.
Unbalanced inputs are audiophile grade, machined, gold-plated connectors.
Input sensitivity (for full output):
1.7 V (8 ohms); 1.5 V (4 ohms)
Speaker outputs:
5-way binding posts, gold plated
Minimum recommended load impedance:
4 ohms (one 4 ohm load or two paralleled 8 ohm loads per channel)
Trigger and control:
Trigger Input (mono 1/8”), Trigger Output (mono 1/8”)
Front panel controls and indicators:
On / Off
(large push button); toggles Standby mode
On / Off LED (1); red indicates Standby mode; blue indicates normal operation;
flashing red indicates a fault (Protect)
Channel Status LEDs (2); blue indicates normal operation; flashing red indicates a fault
(may be disabled by rear panel Status LED switch)
Rear panel controls and indicators:
Power (rocker switch); switches mains power
Input Voltage (protected slide switch); selects 115 or 230 VAC line voltage
Status LED switch (disables front panel Status LEDs and dims On/Off LED)
Input switch (one per channel); selects balanced (XLR) or unbalanced (RCA) input
AC power input:
IEC C17/C18 type inlet and power cord
