Page 6
Configuration
• Verify that the Sherbourn PA 2-250 is configured for the correct operating voltage for your area.
(Voltage is set via the Input Voltage switch on the rear panel of the PA 2-250).
• Verify that all rear panel Input Selector switches are set correctly (balanced or unbalanced)
for each input.
Note: Only one input (balanced OR unbalanced) on each channel is active at once.
• Verify that the rear panel Status LEDs switch is set to On if you want the front panel status
LEDs to be active.
Note: When the Status LEDs switch is set to Off, the two channel Status LEDs will be
Off and the front panel On / Off LED will be dimmed.