background image

Page 2

Introduction

Thank you for choosing the PA 2-250 Stereo Power Amplifier. 
The PA 2-250 combines the superb sound quality and virtually endless power reserves necessary 

to satisfy a discerning audiophile. It posesses with the flexibility and reliability demanded by both 

customers and professional installers. 
Design features like proven class A/B technology, Sherbourn’s intelligent protection system, and true 

commercial grade construction quality and reliability make the PA 2-250 an ideal choice wherever 

two high-powered channels of excellent sounding audio amplification are needed. 

The Sherbourn Team

About This Manual

This manual will provide you with all the information you need to install and configure the PA 

2-250 Stereo Power Amplifier to achieve its optimum potential. This manual also includes a brief 

summary of the features offered by the PA 2-250, a short description of how the controls work, and 

instructions on how to perform common operations. 
You may wish to record serial numbers or other purchase information on the Notes page at the back 

of this manual.

The PA 2-250

The PA 2-250 delivers 300 watts/channel into 8 ohms and over 500 watts/channel into 4 ohms 

with very low noise and vanishingly low distortion, and is ruler flat over the audio band. A massive 

toroidal power supply and discrete fully symmetrical circuit design enable the PA 2-250 to run even 

difficult loads with ease and gives it the ability to reproduce music with the full dynamic range it 

needs to sound its best. The PA 2-250, simply put, is a clean, powerful, truly outstanding power 

amp. 
The PA 2-250 is also quite flexible and includes both balanced (XLR) and unbalanced (RCA) inputs, 

a Trigger Input, a Trigger Output, a rear panel switch to disable the Status LEDs, full-sized five way 

binding posts for speaker connection, and audiophile grade RCA input connectors. The PA 2-250 is 

rack mountable and can run from either 115 VAC or 230 VAC via a convenient removable IEC power 

cord. And, of course, you’re protected by the Sherbourn 5-year warranty. 

Summary of Contents for PA 2-250




















Reviews: