Shenzhen Scan-DIY CR-PRO, User Manual

Page: 33 / 119

33 SCAN-DIY CR-PRO User’s Manual

Make sure that all mechanical linkages to the engine sensors (throttle, gearshift
position, transmission, etc) are secure and properly connected. Refer to Service
Manuals for locations.

Check all electrical wirings and harnesses for proper connections and condition of
its insulation.

Check all rubber hoses (radiator)
and steel hoses (vacuum and fuel)
for leaks, cracks, blockage or other
damages.

Make sure the engine is mechanically
sound. Do a compression check, engine vacuum check, timing check, etc.

Always refer to the manufacturer’s Service Manual
if you are not sure of the repair procedures.
2.6­Settings: Adjustments
To enter the MENU Mode:
1
、
Once the Scan Tool is powered up through the DLC connection, Press .
Button, the wake up screen will display as below:
( Figure 4)
| SCAN-DIY CR-Pro Work On OBD-II/EOBD-II/CANBUS Protocol Vehicle