32
SCAN-DIY CR-PRO User’s Manual
Color changing display to indicate the Scan Tool system status.
RED
SYSTEM Working
YELLOW
Establishing a communication with the vehicle and
PENDING
Code
2.5Getting Started:
Before you use Scan Tool on the vehicle, please ensure that mechanical problems
such as low oil level, damaged hoses, wiring or electrical connections are fixed FIRST.
They may cause a fault code to set.
The following Areas need to be checked before starting any test:
The levels of engine oil, power steering fluid, transmission fluid (if auto
transmission), engine coolant and other fluids must be at proper level. Top up if
necessary.
Check the condition of air hoses and the air filter must be cleaned. Replace if
necessary.
Make sure the timing belts are in good conditions and properly tensioned.
Make sure the spark plugs are cleaned and in good condition. Check for loose,
damaged, disconnected or missing plug cables.
| SCAN-DIY CR-Pro Work On OBD-II/EOBD-II/CANBUS Protocol Vehicle
