Shenzhen MTC WR1201, User Manual

Page: 24 / 77

2. Be sure to make a note of any changes you apply to this page. If you change the LAN IP
address of the router, you have to open a new connection to the new IP
again. Also, you have to set the default gateway addresses of all LAN PCs to this new IP
address.
3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not,
the router will not be able to access Internet.
4.2.2 WAN Setting
Plug Internet cable to WR1201
Set Steps
： ： ： ：
① ① ① ①
Enter the web and Select“Network Settings”
② ② ② ②
Click the“WAN Settings”.
Parameters Specification:
Connection Type:It displays the routers mode
1
、
Configuration the Internet access
Support Static IP mode
、
Dynamic IP(DHCP)
WAN Connection Type
Static IP mode
sure to make a note of any changes you apply to this page. If you change the LAN IP
address of the router, you have to open a new connection to the new IP address and log in
again. Also, you have to set the default gateway addresses of all LAN PCs to this new IP
3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not,
the router will not be able to access Internet.
WAN port.
“Network Settings”.
It displays the routers mode.
Configuration the Internet access
Dynamic IP(DHCP)
、
PPOE.
Instruction
If your ISP provides you with an Ethernet cable from the
incoming Internet side IP information (IP address, subnet
mask, gateway IP address, DNS server address), your ISP
sure to make a note of any changes you apply to this page. If you change the LAN IP
address and log in
again. Also, you have to set the default gateway addresses of all LAN PCs to this new IP
3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not,
If your ISP provides you with an Ethernet cable from the
incoming Internet side IP information (IP address, subnet
mask, gateway IP address, DNS server address), your ISP