Shenzhen MTC WR1201, User Manual

Page: 23 / 77

4.2
Network Settings
T Click “Network Settings
Settings”, “WAN Settings”, “MAC Address Clone
4.2.1 LAN Setting
This page is to configure the basic
access the device’s settings through a web browser. Be sure to make a note of any changes you
apply to this page
Set Steps
： ： ： ：
① ① ① ①
Click “Network Settings”.
② ② ② ②
Select“LAN Settings”.
③ ③ ③ ③
Enter IP Address
， ， ， ，
Subnet M
④ ④ ④ ④
Click “Save” and wait for the router reboot automatically.
Parameters Specification:
MAC Address
： ： ： ：
It displays the Router’s LAN MAC address.
IP Address
： ： ： ：
It displays the Router’s LAN IP address.
Subnet Mask:it displays the Router
Tips
1. Default IP address and subnet mask are respectively 192.168.
” enter the Network setup web page
，
in this page you can set
MAC Address Clone”.
This page is to configure the basic parameters for LAN ports. This IP address is to be used to
access the device’s settings through a web browser. Be sure to make a note of any changes you
.
Subnet Mask.
and wait for the router reboot automatically.
It displays the Router’s LAN MAC address.
It displays the Router’s LAN IP address.
it displays the Router’s LAN subnet mask.
Default IP address and subnet mask are respectively 192.168.1.1 and 255.255.255.0.
in this page you can set “LAN
parameters for LAN ports. This IP address is to be used to
access the device’s settings through a web browser. Be sure to make a note of any changes you
.1 and 255.255.255.0.