Shenzhen Hongdian Technologies NB007, User Manual

Page: 12 / 22

NB007 Analyzer User Manual Initial Configuration
Doc V1.0 3 -8
3
Initial Configuration
3.1
Overview
NB007 can be operated and configured via Bluetooth by installing an APP on smartphone, which is very handy
and visible. This chapter mainly includes: The power on/power off/sleep mechanism, how APP sets up connection
with the device, APP page introduction and how to operate.
3.2
Bluetooth connection
Provide interactive bridge for APP and the device
Step 1: open NB-IOT Analyzer APP, click button at upper right corner and enter Connection State interface.
Step 2: click “Select” button at the back of Bluetooth name of the devices needing to be connected, APP will
select the device to connect, and Bluetooth name will appear in Bluetooth name item on NETWORK page, and it
can be revised manually as is shown in graph 3-2.
1. When Bluetooth name configuration is NB007, in order to avoid repetition of Bluetooth name of multiple NB devices, actua l
effected Bluetooth name is: “default name_the last four digits of Bluetooth mac”. For example, if Bluetooth mac address is
e8:0f:d2:8a:c9:eb, the effected Bluetooth name during default configuration is: NB007_C9EB.
2. If revised Bluetooth name is not NB007, actua l effected name is consistent with configured Bluetooth name, and la st four d igits of
ma c address will not be a dded.
3. After Bluetooth name is revised, loca l connection is not disconnected, a nd new name is used to connect for next connection.
--- End