Shenzhen Hongdian Technologies H7960, User Manual

Page: 88 / 148

Hongdian Corporation
81
H792x 3G/4G Router User Manual
Redistribute
Kernel Enable or disable
Redistribute Kernel Click the button to select.
 Enable
 Disable
Step 2 Click “Add” to add a new RIP route, configuration interface as Figure 5-54.
Figure 4-45 RIP route configuration interface
Step 3 Configure RIP route parameter instruction, as Table 5-27.
Table 4-27 RIP parameter instruction
Parameter Details Operation
Basic Setting
Add Type Add the type of RIP
route Click the button to select Add Type
 When it is “Network”, need to
configure destination network
address.

When it is “Neighbor”, need to
configure neighbor’s IP address
Network(direc
tly connect to
the router) Add the destination
network of RIP route Add the destination network of RIP
route
Format: A.B.C.D/Mask
Neighbor(dire
ctly connect
to the router) Add the neighbor’s IP
address of RIP route Add the neighbor’s IP address of RIP
route
Format: A.B.C.D
Step 4 Single click “save” icon to RIP route setting.

RIP is an interi or ga tewa y protocol . If the communi ca tions between the two routers do not go through
another router, the two routers a re adja cent. The RIP protocol speci fies tha t no informa tion exchange
between non-a dja cent routers ..