Hongdian Corporation
34
H792x 3G/4G Router User Manual
Parameter
Details
Operation
recommend using WPA
encryption
WEP Encryption
(Wired Equivalent Privacy)
Encryption
WLAN password format
5 bits ASCII
13 bits ASCII
10 bits hex digits
26 bits hex digits
Dropdown List
WEP shared
key
Password connected to WLAN
Configure according to the
previous "Encryption" result
wpa/wpa2(WiFi Protected Access)
Algorithms
Encryption algorithms
tkip
aes
Dropdown List
WPA Share
Key
WLAN encryption key, used to
connect the specified SSID
WORD or Number type, refer to
"Parameter Specification Table"
WPA
Renewal
Interval
WLAN client verification
interval; If authentication
passes, it continues to be a
WLAN connection, if
authentication fails,
disconnect the WLAN
connection
Value area
：
120-86400
Units
：
Seconds
When the working mode select s ta tion or repea ter, H7960 Router will automa ti cally ma tch according to
the selected AP and the corresponding encryption algorithm (to keep consistent with AP encryption);
sha red key upda te interval is requi red to fill in the connectio ns of AP key and interval .
---END
Parameter select (Recommend to Single module dual SIM version)
Router parameter select function is used for multi -function switch, like VPN parameter
switch, SIM parameter switch, multi-sever switch .etc. You could pre-config several
network parameter and switch between them, to achieve multiple Telecom operator
backup. This function also could switch VPN setting, for example, when modem 1 online it
connect VPN 1, modem 2 online it connect VPN server, they cannot connect at same time
because conflict, by this function you could easily switch when network failure.
Step 1
Single click “Network > parameter select”.
