Hongdian Corporation
117
H792x 3G/4G Router User Manual
Figure 4-78
Routing table page
Table 4-46
Routing table Parameter instruction
Parameter
Details
Operation
Static route
Network
IP address the router can reach
Subnet
Mask
IP network the router can reach. It is used
together with “Network”
Gateway
Next hop IP address which the router will reach
interface
Interface from router to gateway
metric
Route No which the router reaches destination IP
Policy route
Priority
Priority the router select route
---END
4.9
RESET button function
“RESET” button is on the rear panel and next to power interface. This button can be used
when the router is in use or when the router is turned on. Three are 3 functions to press
“RESET” button when the router is in use:
Press “RESET” for about 2 seconds, router will reboot.
Press “RESET” 5-10 seconds, the router will reboot, meanwhile, the router will be resumed
to default factory setting configuration.
Press “RESET” over 20 seconds, the router will reboot, and get into CFE upgrading. The
router is resumed to default factory setting configuration.
