Shenzhen danfly technology co.,ltd
0755-29524002
13510025117
13
三、
Explanation of the display
Display
Illustration
Display the operating frequency of inverter .The frequency instruction
may from self frequency setting or from jog frequency or
multifunctional terminal 1,2,3,4. If frequency originates from digital
keypad, user can use UP DOWN KEY to set it and saved
automatically
Display the operating frequency output to motor
Display the operating AC voltage input to inverter
Display the output current of inverter
Display the specified parameter code. The present parameter
Value will be displayed by pressing the
key.
Display present parameters.
Press the
key to store the modified parameters.
The parameter is accepted and stored automatically at internal
memory when the “end” (as left picture) remains approximately 1
second on the display.
3.3 LED indicators
RUN:
light up means working
STOP:
red light means stop working
JOG
red light means operating jog command
FWD
red light means forward operation
REV
red light means reversal operation
3.4 Digital keypad instructions:
The keypad will display below information after power on. Press
‘
RUN
’
, inverter will work at
50.00hz as default ; Press
‘
stop
’
inverter will stop working. Abide following steps to set frequency
data.
