Shenzhen danfly technology co.,ltd
0755-29524002
13510025117
12
二、
Digital Keypad Parts and Functions
KEY
Functions
For normal operating or programming mode (the key is always valid)
. Must select programming mode to modify parameters
If the drive is shut down due to a fault occurs, after troubleshooting, press this
button will clear the error message.
This is data setting key. In normal operating mode, press this button to display the
drive status information, such as frequency command, output frequency and input
current; in programming mode, press this key to display the parameter content.
Then Press this button again will save the changed parameters to the internal
memory
Select forward or reverse operation. Press this button , the motor will decelerate
to 0HZ and change direction, but motor will not restart automatically after the
shutdown. An external terminal can control motor forwarding or reversing, when
modify Pr.001 to "d0001" or "d0002"
Press this button ,the motor will run at jog frequency as set by the parameter
specified under Pr.23
start running key (if set to an external terminal control, press this key is invalid)
Stop key.
Press the “Up” and “Down” button to select or modify parameters ..
Note: Pressing the “Up” or “Down” button momentarily changes the parameter
settings in increments. Press and hold these keys to rapidly run through the
possible settings.
