2) Wire Controller Operation
Check the working status
In the state of OFF, LCD display ambient
temperature , In th state of ON, LCD display
water in temperature and water out temperature
；
In the default state
，
press" "or " "once
，
may check P1
、
P2 and ROOM states
；
In the checking mode, if not pressing any buttons
in 5 seconds, system will auto exit the checking
mode and return to default state.
State
IN
OUT
P1
P2
ROOM
State content
Water inlet temperature
Water outlet temperature
Coil 1 temperature
Coil 2 temperature
Ambient temperature
Range
-9
℃～
99
℃
-9
℃～
99
℃
-9
℃～
99
℃
-9
℃～
99
℃
-9
℃～
99
℃
Remark
Actual tested value
Actual tested value
Actual tested value
Preservation
Actual tested value
Parameter checking and Setting
You may enter parameter checking state from
any other states by pressing " " once.
In the state of Parameter Checking
，
each press
on " " can check the next data(circularly
checking)
，
from 0 to c totally 13 parameter'
status.
Parameter 0 and Value 1 on Parameter Checking
State
，
you can directly press " "or " "
for setting.
In the state of Parameter Checking
，
press AT THE SAME TIME " "
AND " " for 3 seconds, vibrator "dee" for once to enter other parameter
setting ,at this moment , press " "or " "may set each parameter
，
press " " to check different parameter.
In the state of Parameter Checking or Parameter Setting, if not pressing any
button within 5 seconds, the system will exit Parameter Checking or Setting
State and return to the default state.
(parameter from 0-C, see the Operation Parameter Table)
4
SWIMMING POOL HEAT PUMP
