STEP 8
PAGE 5
Fig.8A
Fig.8B
Slide the rope through the grommets and around
the side extention tubes at both sides shown
in Fig.7C, Fig.7D & Fig.7E. Insert the 'S' hook to the
corner leg tube, then 'twist' the leg to tight the rope.
After tighting the rope, secure the (4) corner leg tubes
#800216 to the corner connectors and feet plates with
#800218 (5/16" x 3" Bolts) and nuts.
Use the (4) Ratchets as shown in Fig.8A.
Adjust the cover so there is equal overhang
on the front and rear. With the webbing and
ratchets pull the cover snug but not tight.
When all of the half clamps and rope are
secured tight finish tightening the (4) Ratchets
to make final adjustment to the cover.
Fig.7C
Fig.7E
Fig.7D
