PAGE 3
Basic Frame Assembly
STEP 1
STEP 2
STEP 3
STEP 4
Assemble the wind brace set as shown in the
illustrations.
Step 2A
Fit together the end rib using the following parts
(1) #800091 3-Way Top Connectors
(2) #800096 Rafter Poles
(2) #800095 Common Tubes
(2) #800092 3-Way Side Connectors
(1) Wind Brace set
Step 2B
Fit together the middle rib using the following parts
(1) #800093 4-Way Top Connectors
(2) #800096 Rafter Poles
(2) #800095 Common Tubes
(2) #800094 4-Way Side Connectors
(1) Wind Brace set
Using (6) #800218 (5/16" x3" Bolts) and (6) Nuts securely
fasten these tubes. Lay these ribs on the ground at the rear
of your shelters designated location.
Fig. 4B
Fig. 4A
NOTE: Be sure that all of the heads of the bolts are
facing toward the outside of the rib.
Repeat step 2A/2B for all the other ribs.
Using #800098 Cross Rails, #800217
(5/16" x 2" Bolts) and Nuts to connect
these ribs.
800098
800216
800216
800095
800095
Assemble (2) #800216 Corner Support Tubes and (4) # 800095 middle support tube as shown in Fig. 4A and set aside.
Assemble other side Support Tubes as shown in Fig. 4B and connect the middle support tubes with #800218 (5/16" x 3"
Bolts) and nuts. Repeat this step at opposite side.
Note: #800218 Bolts are required for middle support tube connections. Bolts are not inserted to the corner legs
(#800216) at this step.
#800217
#00690
#800103
#800104
Fig. 2A
Fig. 1
Fig. 2B
2 End Ribs
800095
800092
Wind brace
800096
800091
Middle Ribs
800095
800094
Wind brace
800096
800093
#800218(5/16"x3"Bolt)
#800218(5/16"x3"Bolt)
