32 |
P a g e
OPERATION
I
NSTALL
S
HAKER
A
CCESSORIES
Attach clamps, racks, or plates to the shaking platform.
The clamps are now ready to hold sample containers.
Do not load samples at this time.
Sample Flask Clamp Layout
1.
Place clamps on the platform in your desired configuration.
2.
Insert the included screws through the hole in the
bottom of the clamp and into the shaking platform.
Sample Plate Holder Layout
3.
Use a
Phillips screwdriver
to tighten the screws until the clamp is securely fastened. Do not overtighten.