Shelby CS-500S, Owner'S Manual

Page: 6 / 14

. .
. .
23 6
OPERATION
B. TWO-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION:
Transceiver
Button System Function Remark
F - (C) System’s Trigger Check Press within 3 seconds
F - F - (C) System’s Status Check Press within 3 seconds
F - ( ) Optional Driving Pager Press within 3 seconds
F (1 sec.) LCD screen lamp turns on for 5 seconds. Press and hold for 1 second
F - F - F Clear the Flash Icon and Melody Sound Press within 3 seconds
on the LCD Screen Transmitter
C. LED Status Display Chart:
LED Status LED Status
Off Disarmed 2 flashes... pause Zone 2 / Trigger on Trunk/Hood
Slow flash Armed 3 flashes... pause Zone 3 / Trigger on Door Switch
Fast flash Passive arming 4 flashes... pause Zone 4 / Trigger on Shock Sensor
On (solid) Valet mode 5 flashes... pause Zone 5 / Trigger on Ignition Switch
D. Chirp Indicators E. Parking Light Indicator Display Chart:
1 Chirp Arm 1 Flash Arm
2 Chirps Disarm 2 Flashes Disarm
3 Chirps Ajar Warning 3 Flashes Triggered
6 Chirps Car Locator 12 Flashes Car Locator
F. SYSTEM OPERATING CONDITION:
Siren, Horn Parking Light LED Doors Starter Dome Light
1. Arming 1 or 3 Chirps 1 Flash Slow Flash Locking Disable
2. Disarming 2 or 4 Chirps 2 or 3 Flashes Fast Flash or Off Unlocking Turns on for
30 seconds
3. Trigger Alarming Flashes Slow Flash Disable Flashes
4. Panic Alarming Flashes Flashes
5. Car-Jacking Alarming Flashes Disable Flashes
6. Car Locator 6 Chirps 12 Flashes
1. Timer Setting: Example to 10:30 AM
1 . Press & hold the F button for 3 seconds , with two-melody sounds
and the “Hours” digit flashing for adjusting.
2 . Press the or button to decrease or increase the “Hour” digit
until 10:00xx
3 . Press the F button once again then the “Minute” digit flashes for
adjusting.
4 . Press the or button to decrease or increase the “Minutes” digit
until 10:30AM.
5 . Press the F button for 2 seconds with one-melody sound to confirm
exiting the timer program mode.
2. Alarm Timer Setting: Example to 6:30 PM
1 . Press and hold the button for 3 seconds , with two-melody sound
and the “Hours” digit flashing for adjusting.
2 . Press the F button twice , the LCD screen will shows the icon
and the “Hours” digit will flash for adjusting.
3 . Press the or button to decrease or increase the “Hour” digit
until 6:xxPM.
4 . Press the F button once again then the “Minutes” digit flashes
for adjusting.
5 . Press the or button to decrease or increase the “Minutes” digit
until 6:30PM.
6 . Press the F button once again then icon flashes for the alarm
“ON or OFF” setting.
7 . Press the button to stop the “Alert Alarm Timer”, and the “OFF”
icon will show on the LCD screen.
8 . Press F button for 2 seconds with one-melody sound to confirm
exiting the timer program mode.
3. Count Down Timer Setting: Example Set count down
timer at 2:30.
1 . Press and hold the F button for 3 seconds , with two-melody
sounds and the “Hours” digit flashing for adjusting.
2 . Press the F button 5 times , the LCD screen will shows the
icon and the “Hours” digit is flashes for adjusting.
3 . Press the or button to decrease or increase the “Hour” digit
until 2:xx.
LCD REMOTE CONTROL TRANSCEIVER