. .
.
.
19
10
OPERATION
J. DISARMING WITHOUT A TRANSMITTER
Overriding the Alarm without a Password Pin Code: (Factory Default
Setting)
The Override function may be used if the remote transmitter is lost or
inoperative.
1.
Enter the vehicle and turn the ignition switch to the
ON position
.
(The alarm will sound.)
2.
Within
10 seconds
push and release the
valet/program switch.
The
alarm will stop sounding and enter the disarm mode. You can now start
and operate the vehicle normally.
Override the Alarm with Password Pin Code:
(See Alarm Feature IV-
2 Programming.)
Unlike the valet switch easily found and defeated, this security system allows
the consumer to program a password pin code. This feature will offer a
higher level of security protection
To Operate Password Pin Code:
1
. Enter the vehicle and turn the ignition switch to the
ON position
.
(The alarm will sound.)
2. Within 5 seconds
, enter your chosen first digit code by pressing and
releasing the
valet/program switch
.
3
.
Within 15 seconds
of the last digit code enter (the 1st code), turn the
ignition switch
OFF
and then back to the
ON
position.
4. Within 15 seconds
, enter your chosen second digit code by pressing
and releasing the
valet/program switch.
5
. Turn the ignition switch to the
OFF
position.
[4] Chirps
from the siren
or horn and
[3] flashes
from the parking lights will indicate the system
was
disarmed.
Example: To Override the System with the Password Code 83, you
would;
1.
Enter the vehicle and turn the ignition switch to the
ON
position.
(The alarm will sound.)
2. Within 5 seconds
, press and release the
valet/program switch
8
times.
LCD REMOTE CONTROL TRANSCEIVER
C. PROGRAMMING THE LCD REMOTE TRANSMITTER:
Transmitter
Description
Operation
Button
F
(1 sec.)
LCD Screen Lamp Turns
Press and hold for 1 sec.
On for 5 Sec.
1 melody sound will confirm.
F
(3 sec.)
Timer Programming Mode Press and hold for 3 sec.
2-melody sounds will confirm.
F
(5 sec.)
Power Save Mode
Press and hold for 5 sec.
1 melody sound will confirm.
F
-
F
-
F
Clear the Flash Icon and
Press within 3 sec.
Melody Sound on the LCD
Screen Transmitter
F
- (2-sec.)
Button Lock
( )
enable /
Press within 3 sec.
disable
F
- (2 sec.)
Melody / Vibration
( )
Press within 3 sec.
F
- (2-sec.)
Program Count Down
Press within 3 sec. cycling
(Parking) Timer (10-Minute/ leave the buttons starting
20M/30 M/1Hour/1.5H/2.0H) count down then
flashes
F
- (2 sec.)
Enable/disable Bi sound
(Bi)
while pressing button
Summary of Contents for CS-500S
Page 1: ... ...
