CA-1202 user manual – Mode 3
- 4 / 4 –
MHF53501
Internet: www.jablotron.cz
Tel.: 483 559 911
fax: 483 559 993
Pod Skalkou 33
466 01 Jablonec nad Nisou
Your installer’s contact details:
CA-1202 user manual – Mode 3
- 1 / 4 –
MHF53501
The “Athos” CA-1202 GSM pager
MODE 3
Thank you very much for buying our CA-1202
GSM pager
. Now you will always be
able to find where you left your car.
Jablotron Ltd.
1. Alarm
In the case of activation,
warning SMS messages will be sent to all
phones (TEL1 to TEL4) and these phones will also be called with a
siren sound
1
.
2. Remote control by SMS instructions
SMS instructions sent from an authorized phone (TEL1 to TEL4)
can operate the alarm remotely. Factory default instruction texts
are shown in the following table. If an SMS is sent from an
unauthorized phone a valid user code must be entered before
the instruction (e.g. USER IMO).
SMS instruction texts
Default
Your text
Description
IMO
STOP (immobilize) the car (after turning
the ignition key off)
UNIMO
Unblock (mobilize) the car
STATUS
GSM pager will reply with status
information, e.g.
„car reports: Time: 27.01.04
13:04, Status: Armed, Unblocked, Ignition off“.
LOCATOR
To obtain the car location from the GSM
provider.
2
HELP
The GSM pager will reply with a brief list of
SMS instructions.
CREDIT
To obtain the balance of a prepaid SIM
card if used.
2
UC xx...x
To change the user code.
uuuu
is the new
user code, up to 8 characters (A –Z & 0 –
9). The factory default user code is USER
Only basic ASCII can be used in the SMS instruction texts.
Ask the installer to edit the SMS commands for you.
After the HELP command, the GSM pager will reply with the factory default SMS instructions.
The instructions that were modified will not be in the reply.
1
If it is activated, then in the case of an alarm all calls are automatically answered
(it is possible to listen and speak to the car remotely).
