11 Error Messages
Message
Description
-----
Sensor or sensor cable is short-circuited. The current output
will drive to 20.25 mA. Please contact your local dealer.
rOnLY
Attempt was made to change displayed units or Alarm Set point
when Hot Key settings editing is prevented by PANEL submenu.
Refer to Section 7 for more information.
ALOFF
Attempt was made to enter alarm hotkey when alarm is
switched off.
Error
High priority unspecified error during value entry.
Limit a float of invalid subtype.
Set a float with invalid sign.
OuEr
Attempted to adjust a value over its high range calculation
limit.
UndEr
Attempted to adjust a value under its low range calculation
limit.
SPAn-
Set loop current range with Hi Lo end points reversed.
SPAnO
Set loop current range with Hi Lo end points too close.
40
