8.4 Configuration Parameters
(See Appendix B Configuration Sub Menu)
8.4.1 Choosing Moisture Units
The
UnitS
sub menu allows the user to alter the displayed units. While
UnitS
is displayed press the key to enter the sub menu. The currently selected unit
is displayed. Select a different moisture unit by repeatedly pressing the key to
scroll through each of the moisture units.
Press the key to set the chosen moisture units.
For example, to change from a ‘dewpoint °C’ to a ‘dewpoint °F’
Note:
Pressing the key at any time reverts to the Hot key function back to the
measurement display without saving any changes.
8.4.2 Choosing the Pressure Units
The
PUnit
sub menu within
SEtuP
allows the user to alter the units for the
pressure parameters
The choices are:
Pascal x 103
PA E3
psi gauge
PS i9
bar gauge
bAr g
8.4.3 Choosing the Temperature Units
The
tUnit
sub menu allows the user to alter the units for the temperature
parameters.
°F
F
°C
C
8.4.4 Entry of Pressure at Sensor
The
PSEn
sub menu allows entry of pressure at sensor
8.4.5 Entry of Pressure at Display
PdiSP
allows entry of pressure at which to display the dewpoint.
ESC
29
