If the
Addr
option is selected the screen will display the current address value.
Use the & keys to enter the new value. Press the key to set the new
address.
Legal addresses are 1 to 32.
Note:
Once the key is pressed to set the address or baud rate, that value is
committed and will not revert to the previous value even if the 10 second timeout
occurs or the key is pressed.
If the
bAUd
option is selected, use the key to select the required baud rate.
Select between:
9600
4800
2400
1200
Press the key to confirm selection.
Refer to Appendix E for communications protocol.
8.8 Security Passwords
The
PASS
function allows the user to protect certain functions within the
AcuTrak.
While
PASS
is displayed press the key to enter the sub menu. The unit
displays
SEtPt
. Use the key to select the required function and then press
the key. The unit will display
0000
and the secondary display will show a
0
.
The user must enter the current password using the & keys. Pressing the
key then displays
0000
while the secondary display will show a
i
. Enter the new
password pressing to confirm.
8.8.1 Password to control access to the Setup Menu
The user may set a password to secure the
SEtUP
menu. The default password is
0000.
8.8.2 Password to control access to the Reset Command
The user may set a password to secure the
rESEt
menu. The default password is
9000
.
ESC
34
