25
Potential Pinch Points.
Keep hands clear of Post
Driver
while
o p e r a t i n g .
Never
place hand(s) on top of a
post when inserting it
into the Post Driver.
Always close the safety
arm when driving the
post.
4.
With the drive ram in the raised position
and the safety arm swung out of the way,
place a fence post in the I-beam, under the
drive ram hammer plate.
Positioning post in driver.
NOTE: There
should be a 1” to 2” gap
between the top of the fence post and
the bottom of the drive ram hammer
plate. Never drive a fence post without
the rubber debris guard in place.
Post to hammer plate gap shown with a transparent
Debris Guard.
5.
Close safety arm frame to secure the post
(the adjustable roller assembly keeps
tension on the post while it is being
driven).
Safety Arm closed onto post.
6. Do not
stand in front of the drive ram
while operating the Post Driver. Stand at a
45 degree angle to the side of the Post
