4
Remove the MC cable (red) and GRID cable (white). (1 screw for
each)
@
Note for attachment:
1
Be careful not to mistake the attachment position of each
cable. (Refer to the figure above.)
2
The spring terminal must be on the cable terminal.
5
Disconnect the connector, and remove four screws and the
main PWB.
8. Drive unit disassembly
1
Remove the document table.
2
Remove the top cabinet.
3
Remove the bottom cabinet.
4
Remove the drum cartridge.
Spring
White
Red
Main PWB
Bottom cabinet
– 18 –