Sharp XV-Z3000 - Vision WXGA DLP Projector Operation Manual Download Page 30

Page: 30 / 68

Basic

Operation

On-screen Display (confirmation message)

Turning the Power off (Putting
the Projector into Standby Mode)

Press

STANDBY/ON on the pro-

jector or

STANDBY on the re-

mote control, then press that but-
ton again while the confirmation
message is displayed, to put the
projector into standby mode.

Unplug the power cord from the AC
outlet after the cooling fan stops.

• The power indicator on the projector

blinks in green while cooling.

• The power indicator changes to red when

the projector finishes cooling.

• Do not unplug the power cord during projection

or cooling fan operation. This can cause dam-
age due to rise in internal temperature, as the
cooling fan also stops.

Info

STANDBY
button

Switching the Input Mode

Press the appropriate INPUT button on
the remote control to select the desired
input mode.

• When pressing INPUT (

) on the projector,

input mode switches in the following order:

INPUT1

INPUT2

INPUT3

INPUT6

INPUT5

INPUT4

Select the appropriate input mode for
the connected equipment.

INPUT buttons

Image Projection

XV-Z3000_US_EN_h

06.1.13, 8:58 AM

Summary of Contents for XV-Z3000 - Vision WXGA DLP Projector





































































Search results

Summary of Contents for XV-Z3000 - Vision WXGA DLP Projector

Reviews:

Related manuals for XV-Z3000 - Vision WXGA DLP Projector

Brands by name

Popular brands

Sharp XV-Z3000 - Vision WXGA DLP Projector, Operation Manual

Search results

Summary of Contents for XV-Z3000 - Vision WXGA DLP Projector

Reviews:

Related manuals for XV-Z3000 - Vision WXGA DLP Projector

Brands by name

Popular brands