-45
Useful Featur
e
Menu operation
⇒
Page
34
■
Auto Power Off
This function automatically switches the projector
to Standby mode if no signals are received for a set
period.
Note
• When the Auto Power Off function is set to “ON”,
5 minutes before the projector enters standby
mode, the message “Enter STANDBY mode in
X min.” will appear on the screen to indicate the
remaining minutes.
• When the Auto Power Off function is set to “OFF”,
“LED” is set to “On” automatically. Be sure to set
the Auto Power Off function to “ON” to use the
LED Off function. (See page
43
.)
Make sure that both the projector and computer are set
for the same baud rate.
This function changes the fan rotation speed.
•
When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
Selectable items
Description
ON
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
OFF
The Auto Power Off function will be
disabled.
r
Fan Mode Setting
e
Selecting the Transmission
Speed (RS-232C)
Selectable items
Description
9600bps
38400bps
115200bps
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
Description
Normal
Suitable for normal environments.
High
Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
t
Reversing/Inverting Projected
Images
This function allows the projector to be used in a wider
range of projection styles by allowing the image to be
inverted to suit the projection environment (location).
•
See page
15
for details of Projection (PRJ) Mode.
Use “All Reset” to initialize all the adjustments you have
made to the default settings.
Note
The following items cannot be initialized.
• “Fine Sync” menu
— Special Modes
• “Options” menu
— Lamp Timer (Life)
— Language
Other Function
The projector can switch the on-screen display language
among 11 languages.
Selectable items
Description
Front
Normal image (Projected from the front
of the screen)
C Front
Inverted image (Projected from the
front of the screen with an inverted
projector)
Rear
Reversed image (Projected from the
rear of the screen or with a mirror)
C Rear
Reversed and inverted image (Pro-
jected with a mirror)
y
Returning to the Default Settings
Selecting the On-screen
Display Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
XVZ21000̲E̲Ousyu̲P36-45.indd 45
XVZ21000̲E̲Ousyu̲P36-45.indd 45
2006/07/31 19:55:32
2006/07/31 19:55:32
